In partnership with Qatar Petroleum, our client Qatar Shell GTL Ltd.
(Shell) is building a world scale Gas to Liquids (GTL) complex in Ras
Laffan Industrial City, under an agreement with the State of Qatar. A
diversified use of natural gas is emerging, adding a new dimension to
traditional uses of gas by converting gas info, amongst other
products, a high quality transportation fuel virtually free of sulphur
and aromatics.
Qatar, with one of the largest reservoirs of gas, has the stated aim
to be the GTL capital of the world.
Technician
1. INSTRUMENTATION
a. Instrumentation Field Technicians
Qualification and Experience:
The candidate should hove at least a Diploma in industrial Measurement
and Control or other associated subject within the field of
Instrumentation, with at least 8-10 years experience either on onshore
or offshore facilities of the Oil and Gas Industry. It is required for
the candidate to have knowledge of and experience with a wide variety
of field instrumentation.
This shall include planned routine maintenance and unplanned
maintenance in the form of troubleshooting, failure analysis and
problem solving. Experience with field instrumentation interfacing
with DCS, IPS and other PLC type systems is considered desirable.
b. Instrumentation QMI Technicians
Qualification and Experience :
The candidate should have at least a Diploma in Industrial Measurement
and Control or other associated subject within the field of
instrumentation, with at least 8-10 years experience either on onshore
or offshore facilities of the Oil and Gas Industry. It is required for
the candidate to have knowledge of the analytical measurement
principles used and experience as Process Analyser Technician with
field process analysers and laboratory analytical equipment for the
measurement of physical and chemical properties. Knowledge and
experience of toxic and flammable gas detection equipment is also
required. Experience with the latest methodologies for Fiscal Metering
Systems is considered desirable.
c. Instrumentation OCS and PS Technicians
Qualification and Experience:
The candidate should have at least a Diploma in Industrial Measurement
and Control or other associated subject within the field of
instrumentation, with at least 8-10 years experience either on onshore
or offshore facilities of the Oil and Gas industry. It is required for
the candidate to have knowledge of and experience with either
Distributed Control System or IPS (PLC type safeguarding system)
maintenance including diagnostic display analysis and understanding.
It is considered beneficial where candidates have configuration and
system management experience. Experience with Honeywell systems is
considered desirable.
2. MECHANICAL TECHNICIANS
Qualification & Experience:
The candidate should have at least Diploma in Mechanical or equivalent
with at least 8-10 years maintenance experience within Oil & Gas
Industry for Rotating Equipment, Static Equipment (columns, vessels,
valves etc.). Heat Transfer Equipment (Furnaces, Heat Exchangers
etc.), Mechanical Protection devices (Relief Valves, Bursting Disc s
etc.) is required. Field experience shall include planned routine
maintenance and unplanned maintenance in the form of trouble shooting,
failure analysis and problems solving. Experience in Condition
Monitoring, Inspection/Testing of mechanical equipment is highly
desirable.
3. ELECTRICAL TECHNICIANS (FIELD, PROTECTION TEST & INSPECTION)
Qualification & Experience:
The candidate should have at least Diploma in Electrical or equivalent
with at least 8-10 years either onshore or offshore facilities of the
Oil & Gas Industry. Knowledge & experience in Electrical Distribution,
Electrical Installation, Maintenance Execution & Electrical
Protection, Inspection/Testing is essential. Experience in
troubleshooting and analysis of equipment failure is highly desirable.
4. SENIOR LABORATORY TECHNICIANS
Qualification & Experience:
The candidate should have at least graduate in Chemistry or equivalent
with at least 8-10 years either onshore or offshore facilities of the
Oil & Gas Industry. Working experience & Sound Knowledge laboratory
equipments like ICP, IC, GC, & XRF and sound knowledge of working with
international standard procedures (ASTM/ISO/IP) is required. Knowledge
d UMS & Quality Management System is highly desirable. The candidate
should be able to explain the international standard procedures to
laboratory technicians.
Shift Supervisors
A. SHIFT SUPERVISORS (PROCESS)
Qualifications & Experience:
Diploma in Chemical Engineering with 10 - 15 years operational
experience in a gas plant, refinery or chemical plant.
• Have a proven track record as a shift supervisor and senior panel
member, backed up by working experience in some of the main processes
of o GTL or large petrochemical plant, or an offshore production
facility, or a gas treatment plant.
• It s essential that you have good knowledge of computerised systems
far data collection, analysis and reporting. Familiarity and
experience with International Standards and/or Shell Design &
Engineering Practices, and other Shell methodologies such as Flawless
StartUp, HSE case, HAZOP, IPF, RCM and RBI would be an advantage.
• Experience in (pre) commissioning and startup is on advantage.
• Knowledge of computerized systems for data collection, analysis and
reporting.
• Familiarity and experience with International Standards, Design &
Engineering Practices, and other methodologies such as Flawless
StartUp, HSE case, HAZOP, IPF, RCM and RBI.
• Responsible for supervising and leading a shift team. Coordinating
with other department executing operation, plan, ensure manpower
availability, maintenance activities, assessing root causes and
remedies.
• During commissioning & pre-commissioning phase to develop the
training programs and train operators.
• Full involvement in the Commissioning and start up SU plan.
• Create HSE environment & culture among team members, job safety
analysis, PTW & aspects of HSE.
• Fluency in written and spoken English is also essential.
B. SHIFT SUPERVISORS (REFINERY)
Qualifications & Experience:
Diploma in Chemical Engineering with 10-15 years operational
experience in a gas plant, refinery or chemical plant.
• Have a proven track record as a shift supervisor and senior panel
member, backed up by working experience in some of the main processes
of a REFINERY plant, (a gas treatment plant or atmospheric and vacuum
distillations, hydro-cracking, hydrotreating or lube oil units and
storage tanks).
• It s essential that you have good knowledge of computerised systems
for data collection, analysis and reporting. Familiarity and
experience with International Standards and/or Shell Design &
Engineering Practices, and other methodologies such as Flowless
StartUp, HSE case, HAZOP, IPF, RCM and RBI would be an advantage.
• Experience in (pre) commissioning and startup is an advantage.
• Knowledge of computerized systems for data collection, analysis and
reporting.
• Responsible lot supervising and leading a shift team. Coordinating
with other department executing operation, plan, ensure manpower
availability, maintenance activities, assessing root causes and
remedies.
• During commissioning & precommissioning phase to develop the
training programs and train operators.
• Full involvement in the Commissioning and sart up SU plan.
• Create HSE environment & culture among team members, job safety
analysis, PTW & aspects of HSE.
• Fluency in written and spoken English is also essential.
Engineering Supervisors
1. INSTRUMENT/ELECTRICAL SUPERVISORS
Qualification & Experience
The candidate should have at least a Diploma in Industrial Measurement
and Control or an Electrical discipline, with at least 10-15 years
experience in the Oil & Gas Industry either onshore or offshore. The
position is a maintenance Supervisor position and the candidate shall
have a wealth of experience in planned and unplanned maintenance. The
ability to fault find and diagnose faults air equipment and support
subordinates is essential. For candidates with an Electrical
background the experience shall cover a wide range of electrical
equipment inclusive of generation and distribution at both HV and LV,
Static UPS systems, motors both AC and DC, Electrical protection and
Inspection and associated Electrical control systems and a solid
background in Electrical safety is required and the candidate must
have held a certificate/qualification in recent employment to formally
isolate and de-isolate electrical equipment. For candidates with
Instrumentation background the experience shall cover the full variety
of field instrumentation and knowledge on Instrumentation systems is
desirable. The candidate will lead a team of both staff and
contractors. Preference is for supervisors with both instrumentation
and Electrical skills, but candidates with one of the skill will also
be considered.
2. MECHANICAL MAINTENANCE SUPERVISORS
Qualification & Experience:
The candidate should have at least a Mechanical Diploma or equivalent
with at least 10-15 years either onshore or offshore facilities of the
Oil & Gas Industry for Rotating Equipment, Static Equipment (columns,
vessels, valves ect), Heat Transfer Equipment (Furnaces, Heat
Exchangers ect.), Mechanical Protection devices (Relief Valves,
Bursting Disc s ect) is required. Field experience shall include
planned routine maintenance and unplanned maintenance in the form of
trouble shooting, failure analysis and problem solving. Experience in
Condition Monitoring, Inspection/Testing of mechanical equipment is
highly desirable.
3. MAINTENANCE PLANNER/SCHEDULER
Qualification & Experience:
The candidate should have a Diploma in an engineering discipline with
10-15 years experience in Petrochemical industry covering maintenance
work preparation activities and/or shutdown preparation. The
application of risk and reliability centered maintenance techniques;
inspection and best practice maintenance execution would be
advantageous. Exposure to quality management systems is required. A
working knowledge of the Primavera Planning/scheduling software would
be advantageous.
All personnel must be able to work in a multicultural environment and
must be able to communicate effectively with all levels of the
organization. Fluency in English both in writing and verbal is
mandatory and will be tested.
Please ensure your application is sent within 7 days of the
advertisement appearing and meets the following requirements:
• Job applied for must be in e-mail Subject Line.
• CV maximum 3 pages must demonstrate the qualifications, knowledge
and experience required and include full work history.
• Mobil phone number and personal email address must be on the CVs.
• Photos, pass-port copy, certificates and testimonial must be
included.
Recruitment is being carried out by Uzma Group a specialist supplier
of personnel and services to the oil and gas industry.
Address :
Uzma Group
Uzma House
No. 68 & 70, Fraser Business Park,
Jalan Metro Pudu 2, Off Jalan Yew
55200 Kuala Lumpur, Malaysia.
(514669)
qatarshell@uzmagroup.com
Recruiting on behalf of Shell
(Shell) is building a world scale Gas to Liquids (GTL) complex in Ras
Laffan Industrial City, under an agreement with the State of Qatar. A
diversified use of natural gas is emerging, adding a new dimension to
traditional uses of gas by converting gas info, amongst other
products, a high quality transportation fuel virtually free of sulphur
and aromatics.
Qatar, with one of the largest reservoirs of gas, has the stated aim
to be the GTL capital of the world.
Technician
1. INSTRUMENTATION
a. Instrumentation Field Technicians
Qualification and Experience:
The candidate should hove at least a Diploma in industrial Measurement
and Control or other associated subject within the field of
Instrumentation, with at least 8-10 years experience either on onshore
or offshore facilities of the Oil and Gas Industry. It is required for
the candidate to have knowledge of and experience with a wide variety
of field instrumentation.
This shall include planned routine maintenance and unplanned
maintenance in the form of troubleshooting, failure analysis and
problem solving. Experience with field instrumentation interfacing
with DCS, IPS and other PLC type systems is considered desirable.
b. Instrumentation QMI Technicians
Qualification and Experience :
The candidate should have at least a Diploma in Industrial Measurement
and Control or other associated subject within the field of
instrumentation, with at least 8-10 years experience either on onshore
or offshore facilities of the Oil and Gas Industry. It is required for
the candidate to have knowledge of the analytical measurement
principles used and experience as Process Analyser Technician with
field process analysers and laboratory analytical equipment for the
measurement of physical and chemical properties. Knowledge and
experience of toxic and flammable gas detection equipment is also
required. Experience with the latest methodologies for Fiscal Metering
Systems is considered desirable.
c. Instrumentation OCS and PS Technicians
Qualification and Experience:
The candidate should have at least a Diploma in Industrial Measurement
and Control or other associated subject within the field of
instrumentation, with at least 8-10 years experience either on onshore
or offshore facilities of the Oil and Gas industry. It is required for
the candidate to have knowledge of and experience with either
Distributed Control System or IPS (PLC type safeguarding system)
maintenance including diagnostic display analysis and understanding.
It is considered beneficial where candidates have configuration and
system management experience. Experience with Honeywell systems is
considered desirable.
2. MECHANICAL TECHNICIANS
Qualification & Experience:
The candidate should have at least Diploma in Mechanical or equivalent
with at least 8-10 years maintenance experience within Oil & Gas
Industry for Rotating Equipment, Static Equipment (columns, vessels,
valves etc.). Heat Transfer Equipment (Furnaces, Heat Exchangers
etc.), Mechanical Protection devices (Relief Valves, Bursting Disc s
etc.) is required. Field experience shall include planned routine
maintenance and unplanned maintenance in the form of trouble shooting,
failure analysis and problems solving. Experience in Condition
Monitoring, Inspection/Testing of mechanical equipment is highly
desirable.
3. ELECTRICAL TECHNICIANS (FIELD, PROTECTION TEST & INSPECTION)
Qualification & Experience:
The candidate should have at least Diploma in Electrical or equivalent
with at least 8-10 years either onshore or offshore facilities of the
Oil & Gas Industry. Knowledge & experience in Electrical Distribution,
Electrical Installation, Maintenance Execution & Electrical
Protection, Inspection/Testing is essential. Experience in
troubleshooting and analysis of equipment failure is highly desirable.
4. SENIOR LABORATORY TECHNICIANS
Qualification & Experience:
The candidate should have at least graduate in Chemistry or equivalent
with at least 8-10 years either onshore or offshore facilities of the
Oil & Gas Industry. Working experience & Sound Knowledge laboratory
equipments like ICP, IC, GC, & XRF and sound knowledge of working with
international standard procedures (ASTM/ISO/IP) is required. Knowledge
d UMS & Quality Management System is highly desirable. The candidate
should be able to explain the international standard procedures to
laboratory technicians.
Shift Supervisors
A. SHIFT SUPERVISORS (PROCESS)
Qualifications & Experience:
Diploma in Chemical Engineering with 10 - 15 years operational
experience in a gas plant, refinery or chemical plant.
• Have a proven track record as a shift supervisor and senior panel
member, backed up by working experience in some of the main processes
of o GTL or large petrochemical plant, or an offshore production
facility, or a gas treatment plant.
• It s essential that you have good knowledge of computerised systems
far data collection, analysis and reporting. Familiarity and
experience with International Standards and/or Shell Design &
Engineering Practices, and other Shell methodologies such as Flawless
StartUp, HSE case, HAZOP, IPF, RCM and RBI would be an advantage.
• Experience in (pre) commissioning and startup is on advantage.
• Knowledge of computerized systems for data collection, analysis and
reporting.
• Familiarity and experience with International Standards, Design &
Engineering Practices, and other methodologies such as Flawless
StartUp, HSE case, HAZOP, IPF, RCM and RBI.
• Responsible for supervising and leading a shift team. Coordinating
with other department executing operation, plan, ensure manpower
availability, maintenance activities, assessing root causes and
remedies.
• During commissioning & pre-commissioning phase to develop the
training programs and train operators.
• Full involvement in the Commissioning and start up SU plan.
• Create HSE environment & culture among team members, job safety
analysis, PTW & aspects of HSE.
• Fluency in written and spoken English is also essential.
B. SHIFT SUPERVISORS (REFINERY)
Qualifications & Experience:
Diploma in Chemical Engineering with 10-15 years operational
experience in a gas plant, refinery or chemical plant.
• Have a proven track record as a shift supervisor and senior panel
member, backed up by working experience in some of the main processes
of a REFINERY plant, (a gas treatment plant or atmospheric and vacuum
distillations, hydro-cracking, hydrotreating or lube oil units and
storage tanks).
• It s essential that you have good knowledge of computerised systems
for data collection, analysis and reporting. Familiarity and
experience with International Standards and/or Shell Design &
Engineering Practices, and other methodologies such as Flowless
StartUp, HSE case, HAZOP, IPF, RCM and RBI would be an advantage.
• Experience in (pre) commissioning and startup is an advantage.
• Knowledge of computerized systems for data collection, analysis and
reporting.
• Responsible lot supervising and leading a shift team. Coordinating
with other department executing operation, plan, ensure manpower
availability, maintenance activities, assessing root causes and
remedies.
• During commissioning & precommissioning phase to develop the
training programs and train operators.
• Full involvement in the Commissioning and sart up SU plan.
• Create HSE environment & culture among team members, job safety
analysis, PTW & aspects of HSE.
• Fluency in written and spoken English is also essential.
Engineering Supervisors
1. INSTRUMENT/ELECTRICAL SUPERVISORS
Qualification & Experience
The candidate should have at least a Diploma in Industrial Measurement
and Control or an Electrical discipline, with at least 10-15 years
experience in the Oil & Gas Industry either onshore or offshore. The
position is a maintenance Supervisor position and the candidate shall
have a wealth of experience in planned and unplanned maintenance. The
ability to fault find and diagnose faults air equipment and support
subordinates is essential. For candidates with an Electrical
background the experience shall cover a wide range of electrical
equipment inclusive of generation and distribution at both HV and LV,
Static UPS systems, motors both AC and DC, Electrical protection and
Inspection and associated Electrical control systems and a solid
background in Electrical safety is required and the candidate must
have held a certificate/qualification in recent employment to formally
isolate and de-isolate electrical equipment. For candidates with
Instrumentation background the experience shall cover the full variety
of field instrumentation and knowledge on Instrumentation systems is
desirable. The candidate will lead a team of both staff and
contractors. Preference is for supervisors with both instrumentation
and Electrical skills, but candidates with one of the skill will also
be considered.
2. MECHANICAL MAINTENANCE SUPERVISORS
Qualification & Experience:
The candidate should have at least a Mechanical Diploma or equivalent
with at least 10-15 years either onshore or offshore facilities of the
Oil & Gas Industry for Rotating Equipment, Static Equipment (columns,
vessels, valves ect), Heat Transfer Equipment (Furnaces, Heat
Exchangers ect.), Mechanical Protection devices (Relief Valves,
Bursting Disc s ect) is required. Field experience shall include
planned routine maintenance and unplanned maintenance in the form of
trouble shooting, failure analysis and problem solving. Experience in
Condition Monitoring, Inspection/Testing of mechanical equipment is
highly desirable.
3. MAINTENANCE PLANNER/SCHEDULER
Qualification & Experience:
The candidate should have a Diploma in an engineering discipline with
10-15 years experience in Petrochemical industry covering maintenance
work preparation activities and/or shutdown preparation. The
application of risk and reliability centered maintenance techniques;
inspection and best practice maintenance execution would be
advantageous. Exposure to quality management systems is required. A
working knowledge of the Primavera Planning/scheduling software would
be advantageous.
All personnel must be able to work in a multicultural environment and
must be able to communicate effectively with all levels of the
organization. Fluency in English both in writing and verbal is
mandatory and will be tested.
Please ensure your application is sent within 7 days of the
advertisement appearing and meets the following requirements:
• Job applied for must be in e-mail Subject Line.
• CV maximum 3 pages must demonstrate the qualifications, knowledge
and experience required and include full work history.
• Mobil phone number and personal email address must be on the CVs.
• Photos, pass-port copy, certificates and testimonial must be
included.
Recruitment is being carried out by Uzma Group a specialist supplier
of personnel and services to the oil and gas industry.
Address :
Uzma Group
Uzma House
No. 68 & 70, Fraser Business Park,
Jalan Metro Pudu 2, Off Jalan Yew
55200 Kuala Lumpur, Malaysia.
(514669)
qatarshell@uzmagroup.com
Recruiting on behalf of Shell
Postingan
Tidak ada komentar:
Posting Komentar